 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FERROXCUBE DATA SHEET E31/13/9 E cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube E cores and accessories CORE SETS Effective core parameters SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.740 5150 61.9 83.2 83.2 13 UNIT mm-1 mm3 mm mm2 mm2 g handbook, halfpage E31/13/9 30.9 0.5 21.9 min. 9.4 0.25 8.6 min. 13.4 0.15 9.4 0.3 CBW038 Dimensions in mm. Fig.1 E31/13/9 core half. Core halves AL measured in combination with a non-gapped core half, clamping force for AL measurements 40 20 N, unless stated otherwise. GRADE 3C90 AL (nH) 100 5%(1) 160 5%(1) 250 5% 315 5% 400 8% 630 15% 2970 25% Note 1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 20 N. Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 f = 25 kHz; B = 200 mT; T = 100 C 0.52 CORE LOSS (W) at f = 100 kHz; B = 100 mT; T = 100 C 0.58 e 59 95 148 186 237 373 1760 TOTAL AIR GAP (m) 1560 840 480 360 270 150 0 TYPE NUMBER E31/13/9-3C90-E100 E31/13/9-3C90-E160 E31/13/9-3C90-A250 E31/13/9-3C90-A315 E31/13/9-3C90-A400 E31/13/9-3C90-A630 E31/13/9-3C90 3C90 2008 Sep 01 395 Ferroxcube E cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS E31/13/9 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 396 |
Price & Availability of E31-3C90-E100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |